Motul Engine fuel system cleaner

120ml container

This formulation has been designed for high performance motorcycle engines. Needs in this type of engines are very specific, since the lubricant must protect and guarantee the maximum reliability of the engine, clutch and changes. Each of these sets of the bike has very different needs: 

The motor runs at very high revs per minute, much more so than in an automobile engine. The gearbox requires greater protection for high loads between the gear teeth. The clutch is the main actor for their requirements of friction, so that the power is transmitted efficiently, gradually and without overheating by excessive skating. This forces to use bases very selected lubricants. 


INSTRUCTIONS 
It is not necessary to change the oil and filters, can be used with new or used oil, it is compatible with mineral and synthetic oils. 
It is not lost with the oil change. 

MOST COMMON USES 
Racing engines and motorcycles from street with oil bath or dry clutches. 

APPLICATION AND DOSAGE 
Add 30 ml. Metal Lube per liter of oil. 

REPETITION: 
Competition: repeat application every 3 oil changes. 
Street motorcycles: repeat every 50.000 Km or 1,000 hours.