Amazing Special components tailored. Ergan, Carbon and Titanium parts from CNC Racing is a guarantee of performance, strength, reliability, lightness and pure Italian design. Chooese the best for your Ducati!
The incomparable quality of the CNC Racing brand is derived from a special synergy between a large team of selected and highly qualified professionals capable of conceiving, designing and developing special components adapted to your Ducati, and the surprising results of the championship track tests of the Superbike and MotoGP World Championship. What guarantees high performance, resistance, reliability, lightness and design.
The inoexorable and fast growth in the world market has certified CNC Racing as the leader in the high-end specialty components field for professional racing and road use.
From MV Augusta to Ducati Desmosedici of MotoGP, CNC Racing products stand out in the market for their excellence, uniqueness, sophistication and exclusivity, being some of their featured products: black-silver sproket holder, JET LED indicators, rear nuts, kit side fairign hardware, 30mm slave cylinder with logo, etc.
CNC Racing replacement lower clamping nut for the SE700 fluid tank. Machined in aluminum, anodized in black. SKU: YP0058001B
Double-ring belt to be used in conjunction with our GA007B ratchet strap kit for an easy fixing to handlebars or rear sets. 300mm X 25mm, big resistance (till 1000 kg).
CNC Racing IDA80B M8rear turn light adapter kit. Made of Delrin designed to allow the mounting of the turn indicators on the Original Ducati license plate holder. The adapters replace the original spacers without any modification and are compatible with all CNC Racing turn indicators and other aftermarket flasher lights with thread M8. Kit consists of 2...
CNC Racing APPROVED Reflector for Ducati. Ideal to replace the original one in case of break or wear.
CNC Racing anti-corrosion stainless steel screws kit for Ducati dry clutch cover. Replace the original.
CNC Racing anti-corrosion stainless steel screws set for dry clutch pressure plate. Valid for all Ducati models with dry clutch.
CNC Racing electric current wiring kit to power a navigator or other accessory on Ducati Multistrada models equipped with a special connector. The kit consists of 1 piece. Ref: CB004B
CNC Racing wiring kit for the license plate light of your Ducati equipped with a special connector. Quickly and conveniently connect light with this one-piece kit. Don't let an unforeseen event prevent you from enjoying your Ducati.
Ducati Corse neck warmer tube. Essential accessory designed for all passionate Ducatistas to protect you from the cold both when riding your Ducati and in everyday life when you get off the bike. Made of 100% polyester, it features the Italian brand's logo on the entire surface.
CNC Racing Fluid reservoir mounting bracket for Ducati. Made of AISI304 stainless steel for easy mounting of the brake and clutch fluid reservoir.
CNC Racing Fluid reservoir mounting short bracket for Ducati. Made of AISI304 stainless steel for easy mounting of the brake and clutch fluid reservoir.
CNC Racing Fluid reservoir mounting angled bracket for Ducati. Made of AISI304 stainless steel for easy mounting of the brake and clutch fluid reservoir.
CNC Racing brake and clutch fluid reservoir support kit for Ducati. This support is made of AISI 304 stainless steel that allows easy mounting of the fluid reservoirs on Brembo RCS and RCS Corsa Corta clamps.
CNC Racing screw for exhaust heat shield made from solid aluminium alloy with subsequent anodized surface in a rang of colours. Fits on Ducati Monster 1200.
CNC Racing IDA02B turn lights adapters kit. Turn indicator mounting adapters are steel plates built to cover the original indicator fixing hole. The kit contains 4 plates to be used for a 2 turn indicator kit. Fitting below.
CNC Racing IDA05B turn light adapter kit. Turn indicator mounting adapters are steel plates built to cover the original indicator fixing hole. The kit contains 4 plates to be used for a 2 turn indicator kit. Fitting below.
CNC Racing IDA04B turn light adapter kit. Turn indicator mounting adapters are steel plates built to cover the original indicator fixing hole. The kit contains 4 plates to be used for a 2 turn indicator kit. Fitting below.
CNC Racing IDA01B turn lights adapters kit. Turn indicator mounting adapters are steel plates built to cover the original indicator fixing hole. The kit contains 4 plates to be used for a 2 turn indicator kit. Fitting below.
CNC Racing IDA03B turn lights adapters kit. Turn indicator mounting adapters are steel plates built to cover the original indicator fixing hole. The kit contains 4 plates to be used for a 2 turn indicator kit. Fitting below.
CNC Racing M10x1.25 machined ergal and nut with surface anodized treatment in black, gold, red or silver
CNC Racing M10x1 machined ergal and nut with surface anodized treatment in black, gold, red or silver
CNC Racing M8x1.25. Mecanizadas ergal and nut with surface anodized treatment in black, gold, red or silver.
CNC Racing brake fluid reservoir protector for Ducati. Avoids posible brake fluid splashes in case of reservoir leak. Fits on Brembo original front brake reservoirs, as well as on reservoirs of other brands.
CNC Racing tool for brake-clutch fluid tank spouts of Ducati. Tool made in aluminium machined from solid for an easy mounting of the fluid tank spouts.
Complete kit of stickers from the prestigious Italian brand CNC Racing. Decorate your Ducati down to the last detail with these stickers of various sizes with the different logos of CNC Racing and Pramac Racing.
CNC Racing titanum screw for Speed Sensor ABS of Ducati Multistrada 1200 Enduro. Manufactured using a CNC machine from billets : it is made from Grade 5 Titanium which is really lightweight and has great anti corrosion benefits.
CNC Racing Pramac face mask, made of 3 layers of 100% polypropylene. Comfortable, with excellent facial adherence, anti-droplet, breathable and reusable up to 50 times. Printed with eco-friendly water-based ink. Washable by hand or in a washing machine at 60ºC without softener or spinning. Perfect to be accompanied by our hydroalcoholic Gel
Screw for Ducati Scrambler 1100 chain guard. Machined from aluminum alloy of high quality with anodized surface in various colours.
CNC Racing fairing bolt kit for Ducati Monster 937. Composed of 2 bolts with their respective washers and anti-vibration rubber nuts. Made of light aluminum alloy, anodized in various colors. Black: KV479B Gold: KV479G Red: KV479R
Rod bearing for Ducati dry clutch rod by CNC Racing. Maximum capacity of bearing and duration of use. It replaces the original part without the need for any modification, also assuming an improvement in its behavior and greater durability.
CNC Racing brake or clutch tank fluid screw for Ducati. Machined from solid aluminium alloy with anodized surface treatment.
CNC Racing rear fender screw machined from solid aluminum alloy with subsequent anodized surface in different colours for Ducati Monster 1200, 1200S and 1200R.
Coolant tank cover screw CNC Racing KV419 for Ducati Monster 821 and 1200. Made from a light alloy with subsequent anodized surface, the screw replaces the original iron one, often rusted or oxidized.
CNC Racing radiator screw machined from solid aluminium alloy with anodized surface in a range of colours. A high resistance product with a very low weight for Ducati Monster 821 and 1200.
Saddle screw (middle section) machined from solid aluminum alloy with anodized surface in a range of colours.
CNC Racing heat shield screw made from solid aluminum alloy with anodized surface in a range of colours. Fits on Ducati Panigale 899 and 1199.
White Official DUCATI CNC Racing ceramic mug. Feel yourself a Ducatist from the begining of the day.
CNC Racing wheel valve cap kit for Ducati. Machined from solid aluminum with subsequent anodized surface. Two valve caps compound kit.
CNC Racing Turn signal plugs for Ducati. It allows installing electrical indicators without any joints. Fit with all Ducati.
CNC Racing Left hand M10 and 1,25 mm pitch plug for mirror blanking. Plug is used to cover the hole that is left when changing from handlebar mounted mirror to bar end mirror. it is machined from light alloy aluminium with subsequent anodized surface in different colours.